YOP-80
YOP-80 Wired CNC Touch Probe for Machining Centers
The YOP-80 is a wired CNC touch probe for workpiece setup and probing routines where a direct cable connection is preferred. It supports X, Y and Z trigger directions for datum setting, feature location and repeatable workpiece positioning.
The probe uses a 5 m oil-resistant, four-core cable. Confirm the required cable routing, machine travel, CNC probe interface and intended probing routine before installation.
Key Specifications
| Parameter | Value |
|---|---|
| Repeatability, each axis | < 1 μm |
| Test condition | 50 mm stylus at 60 mm/min |
| Trigger directions | ±X, ±Y, +Z |
| Signal transmission | Cable |
| Cable specification | 5 m, oil-resistant, 4-core, 6 mm diameter |
| XY overtravel protection | ±12.5° |
| Z overtravel protection | 6.35 mm |
| Probe weight | 80 g |
| Protection rating | IP68 |
Before Ordering
- Check the full machine movement range and safe cable routing.
- Confirm the CNC control and probe input interface.
- Confirm that the intended program or macro supports workpiece probing.
- Check the required stylus length and access to the measured features.
FAQ
Why choose a wired CNC touch probe? A wired probe can suit stable machine layouts where cable routing is practical and a direct connection is preferred.
Can YOP-80 be used for tool setting? The intended use and CNC functions must be confirmed for the exact machine and probing routine before selection.
Related: CNC touch probes and technical support.
