WOD-80
WOD-80 Wireless CNC Touch Probe for Workpiece Setup
The WOD-80 is a wireless CNC touch probe for workpiece setup and probing routines on machining centers. Its radio transmission and M-code on/off method can support applications where a cabled probe is not practical for the required machine movement or work area.
Selection should begin with the target CNC control, probe interface, machine environment and required probing routine. Confirm that the CNC can process the required trigger, error-alarm and probe-status signals before installation.
Key Specifications
| Parameter | Value |
|---|---|
| Repeatability, each axis | < 1 μm (2σ) |
| Test condition | 50 mm stylus at 60 mm/min |
| Trigger directions | ±X, ±Y, +Z |
| Transmission method | Radio, 2.4 GHz |
| Transmission distance | 15 m |
| Probe on/off | M-code |
| XY overtravel protection | ±12.5° |
| Z overtravel protection | 6.2 mm |
| Probe weight | 220 g |
| Protection rating | IP68 |
Application Checks
- Confirm the CNC probe input and M-code or control method.
- Check radio receiver placement and electrical-cabinet wiring path.
- Review possible sources of signal interference in the machine environment.
- Confirm stylus length, workpiece access and intended probing cycles.
FAQ
When is a wireless probe useful? A wireless probe can be appropriate when cable routing is inconvenient and the machine can support the required probe interface and M-code workflow.
Does radio transmission guarantee compatibility? No. The complete machine interface, CNC input and control routine must be reviewed before ordering.
Explore CNC touch probes or request an application check.
