Servo Motor, Drive & Controller Packages for CNC Rotary Table Manufacturers
For CNC rotary table manufacturers that already have the mechanical rotary unit and need a matched servo motor, drive and controller package. Yidai evaluates the table transmission, motor and encoder, brake method, load and target CNC interface before configuring YD-1 or CSD700.
Servo Motor, Drive and Controller Packages for CNC Rotary Tables
| System | Architecture | Best fit | Selection notes |
|---|---|---|---|
| YD-1 | Separate axis-card controller, matched servo drive and matched servo motor | Projects that prefer or require a split control architecture | No fixed servo power range; drive and motor are selected from table ratio, torque, speed, inertia, load and electrical conditions |
| CSD700 | Integrated axis controller and servo drive, matched with a servo motor | Compact indexed 4th/5th-axis systems that benefit from reduced cabinet space and wiring | Supports matched servo systems from 400 W to 1 kW; final motor and table match must be reviewed |
Engineering Information Needed From the Rotary Table Builder
Mechanical Table Data
Table type and size, reduction mechanism and ratio, rated load, inertia, speed, torque, backlash, positioning accuracy and mounting direction.
Motor and Feedback
Existing or preferred motor, encoder type and resolution, coupling, homing method, limits, brake or hydraulic/pneumatic clamp logic.
Target Market and CNC
Expected FANUC, Mitsubishi, Brother, Siemens or other CNC models, interface preference, operating sequence, annual volume and branding requirement.
OEM Cooperation Options
Yidai Brand
Use the standard Yidai control-system identity with application matching and technical support.
Co-Branded Supply
Combine the rotary table manufacturer's mechanical product identity with a clearly defined Yidai control system.
Private-Label Review
Branding, documentation, minimum volume, technical responsibilities and change control are evaluated case by case.
Commercial and Project Protection
| Project registration | Qualified projects can be registered with the machine, customer region, application and expected schedule to reduce channel conflict. |
|---|---|
| Customer protection | Non-circumvention and lead ownership can be defined in the cooperation agreement for approved projects. |
| Prototype and validation | Begin with a representative table model and acceptance checklist before expanding to additional sizes or configurations. |
| Technical change control | Motor, encoder, ratio, brake, firmware, PLC logic and wiring changes must be reviewed so compatibility is not assumed from an earlier model. |
| Volume and territory | Pricing, territory, exclusivity and annual targets are negotiated from demonstrated capability and confirmed volume; they are not automatic. |
Recommended OEM Validation Process
- Submit table drawings, ratio, load, motor/encoder and brake information.
- Define the target CNC systems, communication method and manual-operation requirement.
- Yidai selects the control architecture and issues a technical assumption list.
- Build and test one representative system using an agreed FAT checklist.
- Freeze the approved configuration, documentation and supply scope before volume orders.
OEM Rotary Table Control System FAQs
What is the difference between YD-1 and CSD700?
YD-1 uses a separate axis-card controller, matched servo drive and matched servo motor. CSD700 combines the axis-control and servo-drive functions in one device and is paired with a suitable servo motor.
Can an existing rotary table use a Yidai controller?
It may be possible after reviewing the reduction ratio, load, inertia, speed, torque, motor and encoder, brake or clamp logic, homing method and target CNC interface. Compatibility is not assumed from table size alone.
What servo power can the systems support?
YD-1 has no fixed servo power range because the drive and motor are selected for each project. CSD700 is used with matched 400 W to 1 kW servo systems.
Discuss Your Rotary Table and Target CNC Market
Send the table specification, drive-train information, target CNC systems and expected annual quantity. We will review a suitable control architecture and cooperation route.
Request an OEM Control-System Review Compare YD-1 and CSD700