HOD-80
HOD-80 Optical CNC Touch Probe for Workpiece Setup
The HOD-80 is an optical CNC touch probe for machining-center workpiece setup and inspection routines. It supports X, Y and Z probing so operators can establish workpiece position, locate features and improve setup consistency before machining.
It uses optical signal transmission with a stated 5 m transmission distance. Before selection, confirm the machine control, probe interface, receiver arrangement and the probing functions available in the CNC software or macro package.
Key Specifications
| Parameter | Value |
|---|---|
| Repeatability, each axis | < 1 μm (2σ) |
| Test condition | 50 mm stylus at 60 mm/min |
| Trigger directions | ±X, ±Y, +Z |
| Optical transmission distance | 5 m |
| XY overtravel protection | ±12.5° |
| Z overtravel protection | 6.2 mm |
| Probe weight | 280 g |
| Protection rating | IP68 |
| Operating temperature | 0 to 60 °C |
Before Ordering
- Confirm the exact CNC model and available probe input interface.
- Check receiver mounting position and line-of-sight requirements inside the machine.
- Confirm the intended routine: workpiece datum setting, feature measurement or tool-related probing.
- Check stylus length, spindle clearance and workpiece access.
FAQ
What is HOD-80 used for? It is intended for machining-center probing tasks such as workpiece setup, datum location and inspection routines when the CNC and machine interface are compatible.
Can it be installed on every CNC machine? Compatibility depends on the exact CNC control, probe interface and available software functions. Send your machine model for an initial review.
See the CNC touch probe collection or contact YidaiCNCParts for application support.
