ZUM-98
ZUM-98 Wireless CNC Touch Probe for Machining Centers
The ZUM-98 is a wireless CNC touch probe for workpiece setup, datum finding and inspection routines on machining centers. It uses radio transmission and supports trigger, error-alarm, low-voltage and signal-strength status information as part of the probe system.
For a successful installation, confirm the CNC probe interface, M-code workflow, receiver position, electrical-cabinet wiring and required software or macro functions before ordering.
Key Specifications
| Parameter | Value |
|---|---|
| Repeatability, each axis | < 1 μm (2σ) |
| Test condition | 50 mm stylus at 60 mm/min |
| Trigger directions | ±X, ±Y, +Z |
| Transmission method | Radio, 2.4 GHz |
| Transmission distance | 15 m |
| Probe on/off | M-code |
| XY overtravel protection | ±12.5° |
| Z overtravel protection | 6.2 mm |
| Probe weight | 280 g |
| Protection rating | IP68 |
Application Checks
- Confirm the exact machine control and available probe signals.
- Confirm M-code activation and the expected ready, alarm and status workflow.
- Check receiver location and possible signal interference.
- Confirm stylus, spindle clearance and feature-access requirements.
FAQ
What is the difference between a wireless probe and a wired probe? Wireless probes avoid continuous probe cable routing, while the correct choice depends on the machine interface, environment and required probing cycle.
Can ZUM-98 be used on every machining center? No. The target CNC control, receiver arrangement and probing software must be assessed before integration.
See CNC touch probes or contact YidaiCNCParts for support.
